Finntrail ATLAS Graphite 3440 Suit
The Finntrail Atlas Graphite 3440 Suit, designed for outdoor enthusiasts and winter adventurers, offers top-of-the-line protection from harsh winter conditions. It boasts a two-piece design, incorporating durable Ripstop material and a HARD-TEX® membrane fabric that can withstand temperatures as low as -20 ℃. Its fully sealed seams and waterproof zippers guarantee dryness, while the reflective elements ensure visibility and safety during low-light situations. Reinforced areas in crucial spots, such as the hips and lower half of the bib, prevent wear and tear. The suit also features an articulated cut for unrestricted movement and insulation from Thermalrate, along with a microfleece lining for optimal warmth and comfort. With strategically placed pockets, including a ski pass sleeve pocket, you can easily carry all your essentials on your winter adventures.
Specifications:
- Type: Two-piece
- Material: Membrane
- Membrane layers: 4
- Waterproofness: 17 000 mm
- Breathability: 7 000 g./m2/24h
-
Durable membrane fabric
-
Tear-resistant membrane fabric
-
Durable water-repellent finish
Like everything, gear loses its useful properties with each wash. Try to minimize the number of washes; the gear will last a long time.
Clean your gear from adhering dirt and rinse under running water.
Washing by hand: To remove minor impurities, ordinary soap, a soft bristle brush, or a sponge are enough.
In a washing machine:- “Membrane fabric” or “Hand wash" mode in cold water with a thorough rinse.
- Use only special detergents for membrane fabrics (do not use laundry detergents, conditioners, and bleaches)
- do not wring
- do not use dry cleaning
- After washing turn the gear inside out and hang it to dry in a well-ventilated area.
- After drying the inside, turn it inside out again and leave it to dry completely.
- Do not dry gear near bonfires, heaters, and in direct sunlight.
If possible, store the gear flat, upright, in a dry and ventilated area
Use clothing covers to protect the membrane from dust. The dust clogs the membrane structure and "blocks" breathing.
Pay attention to creases: do not leave them during storage. Creases can damage protective layers, which leads to micro-cracks on and decreases the effectiveness of gear.